Monthly Archives: October 2016

Moonlight Hunt

October 31, 2016

While cleaning up after sheet mulching under the grape trellis, I noticed the box cutter was missing. Yikes! The blade on that tool was open. I looked everywhere I could think of, then, I looked back at the six-inch thick layer of chips on top of overlapped bike boxes. Hmmm … under there somewhere?

Many people were coming to the orchard soon, including kids. I visualized some child finding the box cutter. I knew I had better make an effort to find it.

I asked Aurora Rents about renting a metal detector but the representative was hesitant since the lost tool was close to a metal fence. I needed advice from the pros.

I left a message with Mark Kulseth, president of Cascade Treasure Club, the local metal detecting metal detector sm WP_20161028_004and treasure hunting organization. I asked him about the different types of metal detectors, thinking that I might buy one and then donate it to the Tool Library (so other gardeners could find those precious pruners buried somewhere in their garden.)

Mark emailed some general information about metal detectors and wrote that he would stop by the next time he was in Seattle. Wow!

All metal detectors will detect underneath the coil but when they get to close to large metal items, such as our chain link fence, there will be interference. With a small diameter coil (3″), it might be possible to detect the object.

He advised me to purchase a Garrett metal detector at KellyCo. An entry-level machine like the Ace-250 would do but it does not come with a small coil. Small coils are after market accessories.

Mark and a friend pulled up to the orchard on Friday and took a few tools out of his truck. He explained that, being near a fence, the best procedure is to use sweeping motions, from the fence inward, listening for an extra tone to indicate more metal than just the fence.

As we walked to the spot where I was sure I had lost the tool, he told me a story of a woman who was positive she lost her beloved engagement ring within a certain two-block area. Mark hunted with patience but came up empty handed. She called him a week later to say she found the ring in a sack of potatoes on her back porch.

Of course, I was thinking, “What if my tool is not where I have asked him to look! I don’t know where the stupid tool is. What a potential waste of his time!”

Sun, Nov 20, 2-4, Work Party
Sun, Dec 18, 2-4, Work Party

Mark turned on his detector in the grape chips and in six seconds he pulled up the box cutter! Easy peasy for a pro. It had not even rusted yet … still perfectly useful.

I was thrilled and he was glad to get on his way. He said he had plenty to do to get ready for the club’s annual Moonlight Hunt, where they all go out with no flashlights and search for coins that are painted black. One of the coins will have a code and the finder will earn a nice new metal detector.

I should show up at this event and just paw around on my hands and knees to search for that special coin!

Ruth

This is a re-post since WordPress ap Jetpack failed to notify subscribers of original post Oct 28.

Moonlight Hunt

October 28, 2016

While cleaning up after sheet mulching under the grape trellis, I noticed the box cutter was missing. Yikes! The blade on that tool was open. I looked everywhere I could think of, then, I looked back at the six-inch thick layer of chips on top of overlapped bike boxes. Hmmm … under there somewhere?

Many people were coming to the orchard soon, including kids. I visualized some child finding the box cutter. I knew I had better make an effort to find it.

I asked Aurora Rents about renting a metal detector but the representative was hesitant since the lost tool was close to a metal fence. I needed advice from the pros.

I left a message with Mark Kulseth, president of Cascade Treasure Club, the local metal detecting metal detector sm WP_20161028_004and treasure hunting organization. I asked him about the different types of metal detectors, thinking that I might buy one and then donate it to the Tool Library (so other gardeners could find those precious pruners buried somewhere in their garden.)

Mark emailed some general information about metal detectors and wrote that he would stop by the next time he was in Seattle. Wow!

All metal detectors will detect underneath the coil but when they get to close to large metal items, such as our chain link fence, there will be interference. With a small diameter coil (3″), it might be possible to detect the object.

He advised me to purchase a Garrett metal detector at KellyCo. An entry-level machine like the Ace-250 would do but it does not come with a small coil. Small coils are after market accessories.

Mark and a friend pulled up to the orchard on Friday and took a few tools out of his truck. He explained that, being near a fence, the best procedure is to use sweeping motions, from the fence inward, listening for an extra tone to indicate more metal than just the fence.

As we walked to the spot where I was sure I had lost the tool, he told me a story of a woman who was positive she lost her beloved engagement ring within a certain two-block area. Mark hunted with patience but came up empty handed. She called him a week later to say she found the ring in a sack of potatoes on her back porch.

Of course, I was thinking, “What if my tool is not where I have asked him to look! I don’t know where the stupid tool is. What a potential waste of his time!”

Sun, Nov 20, 2-4, Work Party
Sun, Dec 18, 2-4, Work Party

Mark turned on his detector in the grape chips and in six seconds he pulled up the box cutter! Easy peasy for a pro. It had not even rusted yet … still perfectly useful.

I was thrilled and he was glad to get on his way. He said he had plenty to do to get ready for the club’s annual Moonlight Hunt, where they all go out with no flashlights and search for coins that are painted black. One of the coins will have a code and the finder will earn a nice new metal detector.

I should show up at this event and just paw around on my hands and knees to search for that special coin!

Ruth

6th Annual Fest is the Best!

October 3, 2016

sm crop Ingela at the press 29464700174_9918fb8688_oHalf way through our 6th annual cider fest I strolled down the path and saw volunteers Jennifer and Liz sitting comfortably on the orchard bench, feet dangling. I realized then that the number and quality of volunteers at this year’s Cider Fest were so superb that these two hard workers were able to take a break to soak up the warmth of both the sun and the wonderful visitors.

Grinning greeters garnered four new volunteers and sold every slice of pie. We also sold donated sm joan greeter WP_20161002_008handmade items. We can now replace the maligned garden forks, fix the mattock and purchase a big roll of floating row cover!

We tossed 170 3-ounce cups into the yard waste so we know we had about 140 people stop by.

sm musicians WP_20161002_004Every year we stress about whether we will have enough apples for the cider-pressing event. This year, however, City Fruit gleaners came through big and dropped off nine boxes of apples for our use. The gardeners at the Good Shepherd Center and at Magnuson orchard were also looking out for us. Hurrah!

 

Thank you so much to the hard-working crew and all of the generous neighbors and visitors.sm cropped girl w apple WP_20161002_012

Volunteers:
Ana M, Kate M, Cassie B, Becky C, Nancy H, Liz A, Joan D, Nora L, Jennifer K, Mitch, Laura, Kristin M, Alice E, Nancy M, Ingela W, Max M, Michelle P, Charlie D, Janet S, Sylvia B, Renee J, Mary G, Lynn G, Bob M, John H

Ruth

Sun, Oct 16, 2-4, Work Party
Sun, Nov 20, 2-4, Work Party
Sun, Dec 18, 2-4, Work Party